$97.00–$1,096.00Price range: $97.00 through $1,096.00per sheet
Standard delivery charge of $65 for all roof sheeting orders up to 4.2m in Auckland. Please request a freight quote if sheeting is over 4.2m or you are outside of Auckland.
ASTARIGLAS® cast acrylic sheets are made from 100% virgin MMA (methyl methacrylate monomer) ensuring that the highest quality product is achieved. This ensures excellent clarity, weather ability and high strength.
Premium quality Acrylic
>92% light transmission (Clear)
99% UVB filtration & >40% UVA filtration
Optimal clarity and no yellowing
Easy to process and fabricate
Outstanding indoor and outdoor weatherability
Warranty:
Clear: 30 years
Light Grey: 10 years
Opal Frost: 10 years
Clear Frost: 10 years
Opal: No warranty
Availability:
All acrylic sheeting must be ordered. We can cut to size at no additional cost, We can only cut squares and rectangles, no angle cuts
Acrylic orders are usually ready with in 2 days
Colours:
Clear, Light Grey, Opal Frost, Clear Frost, Opal
Recommended rafter Spans:
6mm thick – 600mm – 700mm
8mm thick – up to 800mm
10mm thick – up to 1000mm
Roof pitch:
ASTARIGLAS® cast acrylic sheets can be installed on structures with a minimum roof pitch of 5° (88mm per meter)
Recommended thicknesses for Roofing applications are 6mm 8mm & 10mm
ASTARIGLAS® can be joined on to existing rafters using our two piece Aluminium Glazing Bar . Suitable for use on timber and aluminium box section.
North Island
Auckland Metro from Pukekohe to Silverdale – $65
Auckland out of Metro – Contact us for a quote
Hamilton- local delivery $65
Wellington – local delivery $65
South Island
Christchurch Metro local deliveries larger than 2440×1220 $65
Out of town deliveries any size – Contact to quote
Product range – Aluminium Joiners for Twinwall and Crystalite/Astariglas
Freight for Joiners etc will be advised at the time of the order
Storage & Cleaning
Storage information
Twinwall – It is very important that you keep the flutes dry. Please make sure that you keep your twinwall in a covered area away from water (moisture) and dust until installed correctly Acrylic – Please keep the acrylic in a dry area as the sheet comes with a paper masking which is very hard to remove if wet. Custom Glaze – Do not leave your sheet out in the sun as the protection cover can bake into the sheet. Keep undercover until installed.
Cleaning information
To keep your Polycarbonate and Acrylic roofing clean, we recommend cleaning it regularly using warm soapy water and a soft sponge, we do not recommend water blasting or using any other harsh cleaning chemicals as it can break down the protective U.V layer on Polycarbonate sheeting, these cleaners can also contain chemicals that are harmful to PMMA (Acrylic)
