8mm Step Drill Bit used for pre drilling through acrylic sheet.
Acrylic sheeting must be pre drilled to allow for expansion around your fixing. This smart step drill bit drills through the sheet with no cracking!
Smart Step Drill Bit 8mm
$24.00 per sheet
Quality smart step drill bit
Standard delivery charge of $65 for all roof sheeting orders up to 4.2m in Auckland.
Please request a freight quote if sheeting is over 4.2m or you are outside of Auckland.
Please request a freight quote if sheeting is over 4.2m or you are outside of Auckland.
| Size | 8mm |
|---|
Freight Information
For Freight charges please contact Supreme Plastic Roofing on 09 636 0949
Storage & Cleaning
Storage information
Twinwall – It is very important that you keep the flutes dry. Please make sure that you keep your twinwall in a covered area away from water (moisture) and dust until installed correctly
Acrylic – Please keep the acrylic in a dry area as the sheet comes with a paper masking which is very hard to remove if wet.
Custom Glaze – Do not leave your sheet out in the sun as the protection cover can bake into the sheet. Keep undercover until installed.
Cleaning information
To keep your Polycarbonate and Acrylic roofing clean, we recommend cleaning it regularly using warm soapy water and a soft sponge, we do not recommend water blasting or using any other harsh cleaning chemicals as it can break down the protective U.V layer on Polycarbonate sheeting, these cleaners can also contain chemicals that are harmful to PMMA (Acrylic)