Clear Polycarbonate Capping

$5.00 – $40.00 per each

Standard delivery charge of $55 for all roof sheeting orders up to 4.2m in Auckland.
Please request a freight quote if sheeting is over 4.2m or you are outside of Auckland.

Polycarbonate twin wall end capping

  • Long edge is 25mm, short edge is 17mm
  • Used to seal the flutes of the twin wall on each end to prevent dust and insects from entering.
  • Is placed on over the top of the dust tape which is applied first.
  • 6MM & 8MM available

Freight Information

For Freight charges please contact Supreme Plastic Roofing on 09 636 0949

Storage Information

Twinwall – It is very important that you keep the flutes dry.  Please make sure that you keep your twinwall in a covered area away from water (moisture) and dust until installed correctly
Acrylic – Please keep the acrylic in a dry area as the sheet comes with a paper masking which is very hard to remove if wet.
Custom Glaze – Do not leave your sheet out in the sun as the protection cover can bake into the sheet.  Keep undercover until installed.

Start typing and press enter to search

Scroll to Top

Start typing and press enter to search